Start
Devices
List
Update
AutoScan
Settings
SelfUpdate
Tasmota Wiki
Tasmota Commands
Tasmota Templates
Tasmota Troubleshooting
Tasmota Discord
TasmoAdmin Discord
CZ
DE
EN
ES
FR
HU
IT
NL
PL
IT
RU
Configuration: svetlo sklad 1 | svetlo sklad 2 | svetlo sklad 3
ID: 9
192.168.3.101
General
Network
MQTT
FriendlyName (1)
Alexa find name
FriendlyName (2)
Alexa find name
FriendlyName (3)
Alexa find name
PowerOnState
Keep relay(s) off after power on
Turn relay(s) on after power on
Toggle relay(s) on from last saved
Turn relay(s) on as last saved
Turn relay(s) on and disable further relay control
State after powerloss
LedState
Off
Show power state on led (inverted for Sonoff Touch)
Show MQTT subscriptions as a led blink
Show power state and MQTT subscriptions as a led blink
Show MQTT publications as a led blink
Show power state and MQTT publications as a led blink
Show all MQTT messages as a led blink
Show power state and MQTT messages as a led blink
LedState
Sleep (0-250ms)
Set sleep duration from 1 to 250 ms to enable energy saving
Save
Hostname
Hostname
IP Address
The IP Address
Gateway
The Gateway Address
Subnetmask
The Subnet Mask
DNS Server
The DNS Server Address
MAC Address (read only)
The MAC Address of your Device
NTP1 Address
The NTP1 Address
Use AccessPoint
AP1
AP2
Choose the AccessPoint to connect
SSID (AP1)
SSID of AccessPoint 1
Wifi Password (AP1)
Wifi Password for AccessPoint 1
SSID (AP2)
SSID of AccessPoint 2
Wifi Password (AP2)
Wifi Password for AccessPoint 2
WIFI Config
WIFI_RESTART - Disable wifi config but restart (used with alternate AP)
WIFI_SMARTCONFIG - Start smart config for 1 minute and set as current config tool
WIFI_MANAGER - Start wifi manager (web server at 192.168.4.1) and set as current config tool
WIFI_WPSCONFIG - Start WPS config for 1 minute and set as current config tool
WIFI_RETRY - Disable wifi config but retry other AP without restart
WIFI_WAIT - Disable wifi config but retry same AP without restart and flash writes
WIFI behavior on wifi lost
Save
Enable MQTT
MQTT Host
Set MQTT host (max. 32 chars)
MQTT Port
MQTT port between (min. 2, max. 32766)
MQTT Client Name
MQTT Name of the Device (max. 32 chars)
MQTT Fingerprint (TLS only!)
TLS fingerprint as 20 space separated bytes (max. 59 chars)
MQTT Login Username
(max. 32 chars, 0 = disable Username)
MQTT Login Password
(max. 32 chars, 0 = disable Password)
MQTT Topic
Set MQTT AND Button Topic! (max. 32 chars)
MQTT FullTopic
(max. 100 chars)
Group Topic
(max. 32 chars)
Button Topic
(0 = disable, 1 = same as topic, max. 32 chars)
Switch Topic
(0 = disable, 1 = same as topic, max. 32 chars)
Prefix 1: Command
MQTT Command Prefix (max. 10 chars)
Prefix 2: State
MQTT State Prefix (max. 10 chars)
Prefix 3: Telemetry
MQTT Telemetry Prefix (max. 10 chars)
State Text: Off
(max. 10 chars)
State Text: On
(max. 10 chars)
State Text: Toggle
(max. 10 chars)
State Text: Hold
(max. 10 chars)
MQTT Retry Timer in seconds
Set MQTT connection retry timer (10 to 32000)
TelePeriod in seconds
Telemetry Period messages send (10 to 32000, 0 = off)
Retain: Button
Retain: Power
Retain: Sensor
SetOption2: Units
Add units to messages
SetOption4: MQTT response state as
( Off = RESULT Topic, On = Command Topic)
SetOption10: LWT action when changing topic
( Off = Drop, On = Offline)
Save